Travel And Tour World Jan 28, 2026
ARRIS has unveiled a new range of ultralight composite spokes that set a new performance benchmark in the cycling industry revolutionising bike technology with advanced materials.
‘New Composite Shielding For Spacecraft To Debut On 2026 SpaceX Mission – Thomasnet’
Thomasnet Jan 16, 2026
‘Specialty Manufacturer Powers Innovation With Advanced Composite Fabrics – Swtimes.com’
swtimes.com Jan 20, 2026
‘Top Honeycombs Manufacturer Driving Innovation In China’s Advanced Composite Materials Industry – Capecodtimes.com’
capecodtimes.com Jan 29, 2026
‘Predicting Failure Loads Of Graphene Incorporated Adhesively Bonded Single Lap Joints Fabricated With Short Glass Fibre Reinforced Polylactic Acid Using ANN Approach – Nature’
Nature Dec 31, 2025
Additive manufacturing has been prominent for making complicated polymeric structures with PLA being preferred for its biodegradability ease of use and wide 3D printing compatibility. The present study aims to explore the effects of graphene-integrated adhesive on shear properties failure modes and vibrational response of adhesively joined bonded joints prepared with 3D printed short glass fibre-reinforced polylactic acid PLA adherents. Field emission scanning electron microscopy FESEM was used to analyse fracture surfaces while artificial neural networks ANN predicted failure modes using a backpropagation algorithm. Tensile testing of bulk samples indicated that samples printed with 0186 raster orientation have higher tensile strength 30.7ampnbspMPa than samples printed with 45186 26.7ampnbspMPa and 90186 23.4ampnbspMPa raster orientations. Shear test results demonstrate that incorporating 1.0 wt. of graphene into the adhesive enhances the adhesive joint8217s shear properties leading to a 19.51 increase in shear strength compared to neat samples. The free vibrational analysis avowed that the addition of graphene up to 1.0 wt. increases natural frequencies due to improved stiffness from its well-dispersed state within the epoxy matrix. Furthermore the failure load was accurately predicted using an artificial neural network trained on data from stress8211strain curves. The R2 value of 0.9861 indicates that the results are reliable and show a good correlation. Thereby this study demonstrated how graphene-integrated epoxy adhesives enhance the mechanical and vibrational properties of adhesively bonded lap joints prepared with 3D printed short glass fibre-reinforced PLA adherents while also using artificial neural networks to predict failure modes providing a novel approach to optimise the performance of adhesively joined 3D printed components.
‘Click Bond Acquires Brighton Science, Bringing Surface Intelligence To Adhesive-Bonded Fastening – Pulse 2.0’
Pulse 2.0 Jan 08, 2026
Click Bond a Carson City Nevada-based provider of adhesive-bonded fastening and assembly solutions has acquired Brighton Science a Cincinnati-based company known for surface intelligence and adhesion-measurement technology. Financial terms were not disclosed.
‘Gulf Carbon Fiber Industries To Build $120+ Million Composites Line In Qatar – CompositesWorld’
CompositesWorld Dec 17, 2025
Line to produce carbon fiber composite tanks for CNG and H2 and other high-value products will build upxA0the Middle Eastx2019s capabilities.
‘New 3D-printed Smart Material Lets Ceramics Bend To Survive Heavy Loads – Interesting Engineering’
Interesting Engineering Dec 24, 2025
Researchers have finally found a way to make ceramics flex instead of shatter using a smart metal composite made with advanced 3D printing.
‘VisionWave Holdings Signs Promissory Note With C.M. Composite Materials – TradingView — Track All Markets’
TradingView — Track All Markets Dec 30, 2025
VisionWave Holdings entered into a Promissory Note with C.M. Composite Materials for a principal amount of 398345 funded on December 26 2025. The note matures on December 31 2027 bears no interest unless a default occurs and carries a 5 per annum default rate. It may be prepaid at any time
‘The Need For Process Modeling In Filament Winding Applications – CompositesWorld’
CompositesWorld Jan 07, 2026
A discussion of how temperature mandrel material and thickness plus other factors affect the outcome of filament-wound composite shell manufacturing.
‘Composites Fabricating Index Closes 2025 On Upswing – CompositesWorld’
CompositesWorld Jan 09, 2026
December GBI results reveal positive outlook for composites fabricators heading into 2026.
‘Performance And Durability Of Composite Materials – Springerprofessional.de’
springerprofessional.de Jan 03, 2026
This book presents the proceedings of the American Society for Composites 39th Technical Conference. This volume the second of six volumes brings
‘Jetcam Releases Expert V25 With Sheet Metal, Composites Fabrication Enhancements – CompositesWorld’
CompositesWorld Jan 09, 2026
Version 25.12 release delivers intelligent material utilization and seamless license management for enterprise deployments.
‘MLB Stadium Roof Repaired With Composite Materials – American Composites Manufacturers Association’
American Composites Manufacturers Association Dec 22, 2025
To repair the hurricane-damaged roof at Tropicana Field in Tampa FL fiberglass panels were integrated into the existing structure.
’50 Years Of Innovation In Composites | UDaily – University Of Delaware’
University of Delaware Dec 19, 2025
UD39s Center for Composite Materials reflects on a legacy of innovation and charts a course for the next half-century
‘Babcock Trials Composite Repairs To Speed Up Maintenance On Australian And New Zealand Warships – Defenceconnect.com.au’
defenceconnect.com.au Jan 08, 2026
Babcock Australasia has successfully trialled an advanced composite repair technology that could significantly reduce maintenance times and improve fleet availability across the Royal Australian Navy and Royal New Zealand Navy.
‘Singularity AMC Backs Lohia Aerospace To Strengthen India’s Advanced Composites And Aerospace Manufacturing – Machine Maker’
Machine Maker Jan 07, 2026
Singularity AMC a growth-equity investment firm backed by Madhusudan Kela and led by Yash Kela has announced an investment in Lohia Aerospace Systems Private Limited. The investment is aimed at supporting the expansion of advanced composites and aerostructure manufacturing capabilities from India for global aerospace and defence markets. Founded in 2021 by the Lohia family Machine Maker - Latest Manufacturing News Indian Manufacturing News - Latest Manufacturing News Indian Manufacturing News - Machine Maker
‘MEL Composites Delivers Advanced Hull Infusion For Técnico Solar Boat’s Hydrogen-Powered São Gabriel 01 – Fuel Cells Works’
Fuel Cells Works Dec 22, 2025
MEL Composites reinforced its partnership with Tcnico Solar Boat through the successful hull infusion of the So Gabriel 01 an 8m long 2.4m wide hydrogen-powered hydrofoiling vessel.
‘OSU Researchers Advance NASA-aligned Multiscale Modeling To Design Next-generation Aerospace Materials – Oklahoma State University’
Oklahoma State University Dec 18, 2025
Researchers from the College of Engineering Architecture and Technology are taking a significant step toward accelerating the design and certification of advanced aerospace materials through a new multiscale modeling initiative supported by a three-year 750000 NASA grant.
‘GTT Group Announces Exclusive Divestment Of Global Patent Portfolio For Advanced Composite Structures And Modular EV Battery Enclosures – PR Newswire’
PR Newswire Jan 07, 2026
PRNewswire -- Global Technology Transfer Group GTT Group a global leader in patent analysis and transaction services today announced the exclusive...